As a general rule, you should never go above 0 dBFS. This will give you sufficient headroom to work with when you apply other mastering plugins, EQ, compressors, and effects.Ī limiter will prevent your Master levels from clipping.

If your Master levels are peaking at or near 0 dBFS, then set the EQ gain to -6 dBFS. If they do, it’s best to go back into your mix and lower your track levels.Īlthough it is better to set your levels properly while mixing, you could just add a Fruity Parametric EQ 2 to the first slot in the Master track signal chain and lower the gain. To start, your peak levels on your empty Master track should not exceed -6 dBFS (or -23 LUFS if you’re using a loudness compliant meter). Mastering Tip #1: Supply Yourself with Adequate Headroom to Work With Let’s take take an in-depth look at these 8 FL Studio mastering tips. Mastering can involve, editing small mixing flaws, adjusting stereo width, adding noise reduction processing, equalization, compression, peak limiting and volume level control, and dithering. Mastering is an audio post-production process with many technicalities and details to consider.

Mastering Tip #7: Use a Multiband Compressor.

Mastering Tip #6: Master with Mid/Side EQ.

Mastering Tip #5: Apply a High-pass Filter w/30 Hz Cutoff Frequency.

Mastering Tip #3: Master to -1 dBTP (decibels true peak).

Mastering Tip #1: Supply Yourself with Adequate Headroom to Work With.

Mastering fruity loops 10